01
Metallic epoxy
Pigment moved through the resin while it is still wet, so the floor comes out looking like poured stone. No two are the same, and the room decides how it runs.
- Garages
- Showrooms
- Basements
Edmonton, Alberta
Epoxy &floor coatings
Resin floors for garages, shops and warehouse bays. Ground back to clean concrete, coated, and finished to a surface that takes traffic, oil and winter salt.
What we lay down
Floor systems
Every floor starts with the concrete underneath it. The system on top is chosen for the room, the traffic it takes and the look you are after.
02
Flake systems
Vinyl chip broadcast into a resin base and sealed under a clear topcoat. It hides dirt, grips underfoot and takes a beating, which is why it ends up in most garages.
- Garages
- Shops
- Entryways
03
Solid colour
A clean, even field of colour with nothing to distract from it. The straightforward upgrade when a floor needs to be sealed, bright and easy to sweep.
- Utility rooms
- Shops
- Storage
04
Commercial & warehouse
Large pours for bays, shops and storage floors, coated around racking and posts and staged so the work that has to keep running keeps running.
- Warehouses
- Bays
- Commercial
A floor is only as good as the slab under it Which is why the grinder comes out before the resin does. Prep is most of the job, and it is the part you never see once the floor is finished.
Before and after
Same floor, both ends
Drag the handle across any floor to see what it looked like when we walked in.
BeforeAfter
BeforeAfter
BeforeAfter
Drag, or use the arrow keys
Finished floors
The work
Coated around the work, not instead of it Warehouse and commercial floors go down wall to wall around racking, posts and live operations, in stages that keep the bay usable.
How it goes down
The process
Step 01
Walk the floor
We look at the slab, the moisture, the traffic and what the room has to do when it is finished.
Step 02
Prep the concrete
Grind back to sound concrete, cut out cracks and chips, and fill them so the repair disappears under the coat.
Step 03
Lay the system
Base coat, colour or flake, then the clear topcoat that carries the wear.
Step 04
Hand it back
We cure it, clean up and tell you exactly when to walk on it and when to park on it.
